Apri APP!

Godetevi le offerte esclusive.

Apri APP
Creality CR-10 450 x 450 x 470mm Stampante 3D
Creality CR-10 450 x 450 x 470mm Stampante 3D
Creality CR-10 450 x 450 x 470mm Stampante 3D
Creality CR-10 450 x 450 x 470mm Stampante 3D
1/1

Creality CR-10 450 x 450 x 470mm Stampante 3D - Nero Spina UE

Guarda la Traduzione
868.80€
1027.37
12 Recensioni

Coupon:

Promozione:

Supporto pagamento COD

Magazzino e costo

Selezionare
CN-099:Spedisce tra: Aug 21 - Aug 23

Opzioni del prodotto

Selezionare
Nero Spina UE

Recensioni (12)

Karry
Jun 20,2019
The print quality is truly impressive compared to other printers I've had, and mine was also able to handle up to 70mm/s print speeds at 0.3mm layers just fine for functional parts. Only complaint is that some CR10 printers have a control board with an underspecced capacitor, which means the printer has a difficult time getting the nozzle past 225c. For me, I'm easily able to pick up a bigger capacitor and solder it on, but for those not comfortable with that, what you can do as a workaround is set your g-code to print at ~215c, then once the temp stabilizes and the print starts, adjust the nozzle temp to your desired setting. My printer came with an extra 0.4 nozzle tip which was a nice touch. Setting up / assembling the printer took about 30 minutes, super easy!
Vedi di più

Descrizione

Caratteristiche Principali:
• l'aspetto dell'atmosfera è semplice
• Ugello standard 0,4 mm, stampa elevata e buon effetto, addirittura con ugello da 0,8 mm, adatto a grandi dimensioni, alto riempimento, stampa veloce del modello stampaggio
• Struttura stabile, il gantry aumenta l'asta del cravatta per formare una struttura triangolare stabile, riducendo l'errore causato dalla vibrazione dell'asse Z durante la stampa
• Configurazione a doppia cinghia dell'asse y 42 - 60 motore a doppio asse, potenza forte e trasmissione fluida
• La scheda madre a doppia potenza, la scheda madre è alimentata da 75 W ed il focolaio è alimentato da 750W di alimentazione
• Il focolaio è riscaldato a 100 ° C entro 10 minuti
• Standard BL touch, la compensazione automatica dell'asse Z per la ventà della scheda di piattaforma, risolve facilmente il problema di stampa causata dalla ventà della piattaforma
• Standard di interruzione continua, funzione di rilevamento della corrente, per evitare il interruzione di stampa causata da interruzione di corrente

Specificazione

Generale

Marca: Creality
Modello: CR-10 MAX
Tipo di Sciarba: Fai da te
Materiale (Frames): Estrusione in alluminio
Bordo della Piattaforma: Base in alluminio
Quantità Ugello: Singolo
Diametro Ugello: 0.4 millimetri
Temperatura dell'ugello: temperatura ambiente a 250 gradi
Prodotto Formando Dimensione: 450 x 450 x 470mm
Spessore dello Strato: 0.1-0.4mm
Stampa Offline della Scheda di Memoria: Carta di TF
Velocità di Stampa: 180mm/s
Temperatura di Piattaforma: temperatura ambiente a 100 gradi
Materiale di Supporto: PETG,PLA,TPU,Legno
Diametro Materiale: 1.75 millimetri
Lingua: Inglese
Formato del File: AMF,OBJ,STL
Funzione di Sostegno Modello: sì
Voltaggio: 100V / 240V
Host Software per Computer: Cura
Tipo di Imballaggio: Imballaggio non Assemblato
Tipo di Connettore: USB

Dimensioni e Peso

Peso di Prodotto: 20,0000 Kg
Peso di Pacchetto: 24,8000 Kg
Wise del Prodotto (L x P x A): 65,00 x 78,50 x 73,50 cm / 25,59 x 30,91 x 28,94 pollici
Formato del Pacchetto (L x P x A): 73,50 x 73,50 x 30,50 cm / 28,94 x 28,94 x 12,01 pollici

Contenuto della confezione

Contenuto Imballaggio: 1 x Stampante 3D
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE
Creality CR-10 450 x 450 x 470mm Stampante 3D- Nero Spina UE

Prodotti consigliati

Prodotti sponsorizzati

Bonus per i nuovi membri: buono da $50
868.80€

Creality CR-10 450 x 450 x 470mm Stampante 3D

Colore

Misura

Quantità - +
Rate: Scegli
loading...
loading...
Annulla
loading...
loading...
loading...

Recensioni

4.92 *****
  • 11
  • 1
  • 0
  • 0
  • 0
  • Tutti ( 12 )
  • ( 0 )
  • ( 0 )
Karry
Jun 20,2019
The print quality is truly impressive compared to other printers I've had, and mine was also able to handle up to 70mm/s print speeds at 0.3mm layers just fine for functional parts. Only complaint is that some CR10 printers have a control board with an underspecced capacitor, which means the printer has a difficult time getting the nozzle past 225c. For me, I'm easily able to pick up a bigger capacitor and solder it on, but for those not comfortable with that, what you can do as a workaround is set your g-code to print at ~215c, then once the temp stabilizes and the print starts, adjust the nozzle temp to your desired setting. My printer came with an extra 0.4 nozzle tip which was a nice touch. Setting up / assembling the printer took about 30 minutes, super easy!
Jackson
Jun 20,2019
I bought this printer to make parts for my rc car, but once i saw how amazing the printer printed i decided to test and print other things like this soap holder, and the prince symbol for my best friend. It printed so flawless He didnt believe me that it was 3d printed. I couldn’t ask for a better printer then this. I contacted creality just to see how long it would take to get back to me if i ever had a problem. I was amazed when they got back to me within 24 hours. Best product and service you could ever ask for. If you are looking for a 3d printer and a company that will have your back, go with creality. This printer it comes with an sd card, the usb reader, usb cable and an extra extruder nozzle.
Dwight Bessemer
Jun 19,2019
this is my first 3d printer and I am extremely pleased with it, i model on Fusion 360 and slice with Cura and all of my models come out with fantastic detail. the build area is massive compared to a lot of printers in this price range
Pearl Beerbohm
Jun 20,2019
Have already printed a lot, since I’m an architecture student, and it’s great.Also, I bought it because so many other students in my school has the same one, and it’s just really good, really big, and not expensive
Judy Effie
Jun 21,2019
This printer has been amazing, it’s my first 3D printer and the learning curve was easy. Just make sure to watch a lot of set up and unboxing videos before you start, it’ll save you a lot of trouble at first. 
Dana Eden
Jun 19,2019
this is a great printer for a DIY hobbie use. This will not be a perfect printer to work great straight out of the box without learning a ton of information and troubleshooting.
Sampson Thomson
Jun 19,2019
This printer is amazing! quality iw wonderful . Easy to put together and start printing. Irecomend it to anyone who likes to build things! well worth the money.
Paul Hutt
Jun 20,2019
This printer was easy to set up and use. There was a bit of of a learning curve but my prints are coming out better and better as I get to know the printer.
Mavis Richards
Jun 21,2019
I needed a 3D printer for college. It was fairly easily to put together with some help from friends. It does the job with minimal complications.
Berg Hawthorne
Jun 20,2019
My first 3d printer. It was very well package and easy to assemble. Working great so far. Still learning how to use. Very pleased
Vedi di più
Vedi di più
Vedi di più