Apri APP!

Godetevi le offerte esclusive.

Apri APP
Tronxy 3D Stampante Fai da Te Kit
Tronxy 3D Stampante Fai da Te Kit
Tronxy 3D Stampante Fai da Te Kit
Tronxy 3D Stampante Fai da Te Kit
Tronxy 3D Stampante Fai da Te Kit
Tronxy 3D Stampante Fai da Te Kit
Tronxy 3D Stampante Fai da Te Kit
1/1

Tronxy 3D Stampante Fai da Te Kit - Nero US Spina

Guarda la Traduzione
131.35€
159.1
29 Recensioni

Coupon:

Promozione:

Supporto pagamento COD

Magazzino e costo

Selezionare
CN-099:Spedisce tra: Sep 25 - Sep 27

Opzioni del prodotto

Selezionare
Nero US Spina

Recensioni (29)

Rich
Nov 22,2018
This is a great printer to learn on. The only thing it is lacking is a heated print bedand maybe a larger print volume. I knew it was small when I purchased this printer. I wanted to be sure I would be able to do this and enjoy it. Yes I have lots of fun with it and it is worth every penny I paid for it. Now it has taught me a lot about printing and now I need to step up to a heated print bed and a bigger print volume. I have been making props for my N scale train set. I model the parts in my 3d modeling software Hexagon 2,5..and print it right on this little printer. I would recommend this printer for beginners. I am attaching a couple pictures of a tunnel entrance I printed using this printer
Vedi di più

Descrizione

Tronxy 3D Stampante Fai da Te Kit

Descrizione:
Sta ancora cercando una stampante 3D ma e' difficile prandere una decisione?

con130 x 100mm volume di stampa , 0.1 - 0.3mm strato spessore,  e' certamente la scelta migliore!

Caratteristiche principali:
● Supporta SD carta o off-line stampa, specialmente conveniente quando non c'e' il computer.
● LCD schermo dimostra la informazione direttamente e semplice per manipolare.
● 0.1 - 0.3mm strato risoluzione accelera il processo di progetto.
● Supporta multiplo 3D filamento stampa:ABS / PLA / wood / nylon PVA / PP / luminescent.
metallo per migliorare funzionalmente e la performance.
● Quick-release feed ingranaggi per il piu' rapido e piu' fluente filamento nutrimento.
● Operation system: Windows XP / Mac / Linux
● Progettato per fornire usabilita' ,qualita' e performance.
● Fatto do piano-nero laser-cut acrilico frame per mantenere garage-built sensazione e il fascino del fatto-a-mano. 
● Appropriato per un ampio range di clienti,giovani o anziani,professionali o amatori ecc.
● Stampa di precisione,sbarra bastoncini in acciaio inossidabile, ingranaggi ,portamenti e connettori per un movimento scorrevole .

● E' smontato DIY kit, il che ti offre un'esperienza indimenticabile di  passo-dopo-passo con 3D stampatore.Finche' e' appassionato di creativita',non potrebbe perdere questo prodotto.

Specificazione

Custom

Ambiente di operazione: 10 - 30 Centigradi

Generale

Marca: Tronxy
Tipo di Sciarba: Fai da te
Area Incisione: 130 x 100mm
Materiale di Cornice: piatto in acrilico
Bordo della Piattaforma: Base in alluminio
Quantità Ugello: Singolo
Diametro Ugello: 0.3 millimetri
Spessore dello Strato: 0.1-0.3mm
Stampa Offline della Scheda di Memoria: Scheda SD
LCD Schermo: sì
Velocità di Stampa: 100mm/s
Materiale di Supporto: ABS,Luminescente,Nylon PVA,PLA,PP,Legno
Diametro Materiale: 1.75 millimetri
Formato del File: G-code,OBJ,STL
XY precisione di posizionamento: 0.012mm
Z precisione di posizionamento: 0.004mm
Host Software per Computer: Cura,Repetier-Host
Tipo di Imballaggio: Imballaggio non Assemblato

Dimensioni e Peso

Peso di Prodotto: 4.000 kg
Peso di Pacchetto: 4.8000 kg
Taglia del Prodotto: 33.70 x 30.50 x 32.00 cm / 13.27 x 12.01 x 12.6 pollici
Formato del Pacchetto: 34.70 x 23.00 x 15.00 cm / 13.66 x 9.06 x 5.91 pollici

Contenuto Confezione

Contenuto Imballaggio: 1 x Tronxy 3D stampante fai da te kit, 1 x 8G scheda di memoria, 1 x USB Cavo 1 x Chiave esagonale, 1 x Cacciavite, 2 x 5m PLA forniture (Colore casuale), 1 x 0.3mm Ugello, 1 x 0.4mm Ugello, 1 x 0.5mm Ugello, 1 x Adattatore

Tronxy 3D Stampante Fai da Te Kit- Nero US  Spina


Prodotti consigliati

Prodotti sponsorizzati

Bonus per i nuovi membri: buono da $50
131.35€

Tronxy 3D Stampante Fai da Te Kit

Colore

Misura

Quantità - +
Rate: Scegli
loading...
loading...
Annulla
loading...
loading...
loading...

Recensioni

4.72 *****
  • 21
  • 8
  • 0
  • 0
  • 0
  • Tutti ( 29 )
  • ( 14 )
  • ( 5 )
Rich
Nov 22,2018
This is a great printer to learn on. The only thing it is lacking is a heated print bedand maybe a larger print volume. I knew it was small when I purchased this printer. I wanted to be sure I would be able to do this and enjoy it. Yes I have lots of fun with it and it is worth every penny I paid for it. Now it has taught me a lot about printing and now I need to step up to a heated print bed and a bigger print volume. I have been making props for my N scale train set. I model the parts in my 3d modeling software Hexagon 2,5..and print it right on this little printer. I would recommend this printer for beginners. I am attaching a couple pictures of a tunnel entrance I printed using this printer
bifrons
Jan 30,2017
All parts are well protected in the package, the assembly does not take to long, about 3-4 hours without speeding up. The printer seems pretty stable the parts are'nt moving if they are'nt meant to. I just printed the example file after a short calibration process, and... awesome ! first try is a success, very satisfying ! Despites what's written in cons, i definitely recommand this printer. It's affordable, well built, and the pre charged reptier software is pretty handy.
Suggerimento:
the laser cuted parts may have an angle slighty bellow 90° on the sides, it can be corrected with sandpaper or when mounting the pieces together with nuts and bolts. the holes in the 3D printed parts where too small for the 8mm rods, i had to drill them again. the documentation is sufficient if you are an handyman but can be confusing, it lacks some documentation to properly choose softwares such as slicer and 3D modeler, it's really a DIY printer !
RubyFOX
Jul 19,2016
I bought a mini printer specially as needed compact size. Sobral fast enough, slowly, in a single day. Assembly was easy, all of excellent quality. Included eating vse necessary. Plastic for test printing of black and white colors. Interchangeable nozzles memory card. The printer is perfect for desktop use near the computer or, for example for children.
Suggerimento:
Later, I changed to a more interesting frame is also a plus, because in fact it is a constructor. Now he works with the kinematics of Сore-XY
Evgeny
Sep 30,2016
The item was very fast delivered to Ukraine directly to me with "Nova Poshta" for free. The price was wonderful and I didn't pay custom taxes even. I got it together very fast and without issues. I printed the test file from the card included - the printing is very fine. A lot of thanks for this buitiful 3D printer!
Suggerimento:
Thanks.
Jairo
Sep 11,2016
Muy buena relación calidad / precio. Imprime piezas de muy buena calidad. Fácil de montar siguiendo el vídeo. Recomiendo utilizar el software "Cura" con un grosor de capa de 0.2mm para unas impresiones de muy buena calidad. Funciona perfectamente tanto con PLA como con ABS, aunque utilizando ABS hay que aplicar laca en la base (funciona perfectamente con laca para pelo)
Suggerimento:
El motor del extrusor presionaba mucho el filamento y se quedaba atascado, pero basta con aflojar el tornillo del muelle para solucionar este problema.
Mohd Almajed
Dec 25,2016
Im happy with the things i getsince i ordered this printer to use its parts in another project im not going to be able to see it running. but the parts are GREATexcellent packaging. Nice job GB
Suggerimento:
none
Gadgetbuys
Feb 17,2018
Exceptionally packed for the journey over to South Africa. Fast delivery and great product overall. Thank you very much. Will be using this website again to buy and import products. Very good service.
Suggerimento:
NOne
james
Jul 18,2018
Impresora 3d de excelente calidad buena impresión y costo ajo muy recomendable, el armado es fácil e intuitivo, solo que es un poco pequeña, para trabajos escolares es excelente,
Suggerimento:
es pequeña pero con resultados muy buenos,
Mike
Feb 13,2017
Definitly not a 3D printer for pro, it work pretty ok but a lot of little setup to do all the time. I had some fun to build it.
Suggerimento:
Buy this printer only if you want to discover the world of 3D printer, the quality is not crazy but enough to make some figurines. You ll need some patience and some time to build it, i needed around 3h to build and 1h to setup the printer correctly (see my pikachu^^).
Tarskineater
May 16,2017
Easy to build. Was learning experience to get this done but in end I get my printing done.
Suggerimento:
Video did not show all parts of build but good that I did find in END manual from sd mem. Y-belt was hard to get tight but good that I did find help in Facebook forum and I have put picture of it to this.
Vedi di più
Vedi di più
Vedi di più