ZHUOLAN 120W Fonte di Alimentazione Impermeabile - Grigio argento
Coupon:
Promozione:
Supporto pagamento COD Magazzino e costo
SelezionareOpzioni del prodotto
SelezionareDiscussione
Vedi di più
Descrizione
● Elevata efficienza, lunga durata e elevata affidabilità
● Ripple DC basse, alta efficienza
● Temperatura di esercizio bassa e durata utile
● Ottima proprietà di isolamento, alta resistenza dielettrica
● Livello impermeabile: IP67
● Test di masterizzazione a pieno carico del 100%
Specificazione
Generale | Potenza Nominale (W): > 100 |
|---|---|
Specificazioni | Formato del Pacchetto (L x P x A): 22 x 9 x 6 cm / 8,65 x 3,54 x 2,36 pollici Peso di Pacchetto: 1.088 kg Wise del Prodotto (L x P x A): 21 x 7 x 4,3 cm / 8,25 x 2,75 x 1,69 pollici Peso di Prodotto: 1,003 kg |
Contenuto della Confezione | Materiale principale: 1 x ZHUOLAN 120W Fonte di Alimentazione Impermeabile |
Detailed parameters
Input voltage: AC 90 - 250V, suitable for many countriesInput current: 0.87A
Input power: 150W
Input frequency: 50 - 60Hz
Output voltage: DC 12V ± 0.5V
Output voltage adjustment range: ± 10 percent
Output current: 10A
Current range: 0 - 10A
Output power: 120W
Waterproof rating: IP67
The length of input cable: 25 ± 5(cm)
The length of output cable: 25 ± 5(cm)
Steady and precise output voltage.
Short circuit protection, overload protection ( 105 - 150 percent ), over voltage protection ( 115 - 135 percent).
High efficiency, long life and high reliability.
Widely used as the power adapter for LED strip, LED display, billboard, industrial equipment, etc.
Good for outdoor and indoor use.
Product installation instructions:
1.The installation, use a length of screw less than 4mm to fix the power supply.
2. Before the installed power run, check and proofread each wiring terminals on, make sure the input and output, AC and DC, positive and negative voltage.
And current values such as the right to eliminate wrong connection reverse phenomenon, to avoid damage to the power supply and user equipment.
3. Use a multimeter to measure power before hot, neutral and ground short circuit, the output is shorted; load when power is the best start.
4. Do not exceed the power supply when using the nominal value, so as not to affect the reliability of the product. To change the power supply output parameters, the power supply to the customer before using our technical surgery department consulted to ensure the use of the product and reliability.
5, In order to ensure the safety and reduce the use of interference, ensure reliable grounding ground (grounding wire more than AWG18 #).
6, In order to extend the life of power, our company can provide duct design solutions.
7. Do not frequent switching power supply, or affect their life.
8. Such as power failure, please do not repair them, please contact the company as soon as possible to resolve.
