F90 90mm Wasp Mini FPV Drone da Corsa - BNF - Giallo Versione 1
Coupon:
Promozione:
Supporto pagamento COD Magazzino e costo
SelezionareOpzioni del prodotto
SelezionareRecensioni (23) Vedi di più
- It is an absolute blast to fly. Has Betaflight pre installed. Pretty easy to configure and get running. RUNS 2S!!! Video signal is crisp and doesn't brown out that much. Beeper built in for low voltage and lost signal/drone. Killer price point. Bound right up to my Devo F12E but I couldn't get it configured in Betaflight but that didn't matter as I use my FS-i6x for my racers. Overall a pretty killer quad!!
Descrizione
Descrizione:
La F90 quadcopter FuriBee è come una vespa, volare furiosamente con adeguata agilità. Il suo sistema di propulsione sorprendente può essere alimentato dalla batteria 30 ° C, e il suo controllore di volo F3 spazzolato supporta 1 - 2S alimentazione. Ancora più importante, è armato con un ricevitore onnipotente che è compatibile con i protocolli vari. Dopo carica completamente, può volare ininterrottamente per 5 minuti.
Cosa c'è di diverso
Versione 1: tra cui DSM Ricevitore
Versione 2: non comprese FrSky Ricevitore
Versione 3: tra cui FrSky ricevitore, trasmettitore, FPV Goggles, e il telecomando
Nota:
I colori di eliche e guardie eliche sono soggetti a disponibilità di magazzino.
Specifiche tecniche:
Marca: FuriBee
Modello: F90
Formato: 90mm
SP Racing F3 EVO spazzolato regolatore di volo
- Può essere alimentato da un massimo di tre celle LiPo
- Supporta l'input di PPM, SBus, ricevitori DSM segnale
- Dotato di un segnale acustico ed è possibile impostare la tensione di allarme
- MPU6050 Gyro / accelerometro
- Connettore micro USB per la programmazione
Onnipotente 8CH DSM Ricevitore
Compatibilità: DSMX / DSM2, JR, Orizzonte, Walkera e telecomando Spektrum (. Per quanto riguarda i principianti, si consiglia di utilizzare il trasmettitore DSM2)
Distanza: 1.5km (all'aperto) / 300 (al coperto)
Tensione: 3.0 - 3.6V
Dimensioni: 9.5 x 1 millimetro
8520 Coreless Motor
Diametro del motore: 8,5 millimetri
lunghezza del motore: 20mm
Diametro Albero di uscita: 1.0mm
lunghezza del pozzo di uscita: 5mm
Peso: 5g
Tensione: 3 - 5V
Corrente: 0.15A
RPM: 35.000-37.000 (3V), circa 50000 (5V), 52000 (7.4V)
eliche
44 millimetri a tre pale
Batteria
400mAh 7.4V 2S 35C (incluso)
Camera AIO FPV
Risoluzione: 600TVL
Frequenza: 5.8GHz
Canali: 40
Alimentazione: 25mW
Distanza di trasmissione: circa 100 m
trasmettitore integrato FPV
Clicca qui per scaricare il manuale utente della fotocamera FPV.
Specificazione
Generale | Tipo di Sciarba: Batteria,Macchina Fotografica,Kit telaio,Motore,Elica,Ricevitore,Trasmettitore |
|---|---|
Il motore | Diametro Albero: 1.0mm Dimensioni Motore: 8.5 x 20mm Max. Corrente Continua (A): 0.15A |
Fotocamera | Risoluzione Video: 600TVL (risoluzione orizzontale) |
Batteria | Batteria (mAh): 400mAh 7.4V 2S 30C |
Dimensioni e Peso | Peso di Pacchetto: 0.250 kg Formato del Pacchetto (L x P x A): 20.00 x 15.00 x 6.00 cm / 7.87 x 5.91 x 2.36 pollici |
Contenuto della Confezione | Materiale principale: 1 x F90 RC Quadcopter (tra cui DSM ricevitore), 1 x Batteria, 4 x Elica di ricambio, 1 x Manuale inglese, 1 x Cavo USB di carica |
Il colore dell'articolo e lo stile (o pattern) è soggetto a disponibilità di magazzino, ci riserviamo il diritto di sostituire un altro colore / modello.
Prodotti consigliati
Prodotti sponsorizzati
- 13
- 8
- 1
- 1
- 0
- Tutti ( 23 )
- ( 18 )
- ( 4 )
- It is an absolute blast to fly. Has Betaflight pre installed. Pretty easy to configure and get running. RUNS 2S!!! Video signal is crisp and doesn't brown out that much. Beeper built in for low voltage and lost signal/drone. Killer price point. Bound right up to my Devo F12E but I couldn't get it configured in Betaflight but that didn't matter as I use my FS-i6x for my racers. Overall a pretty killer quad!!
- Suggerimento:
- The overall build is kind of flimsy, I cut the prop guards off and cut the screws and nubs for the motor seats down. All the spares are only stocked in China. My 5v was messed up the FC had a broken component on it, I ran battery voltage to the buzzer and the FPV camera/TX and 3v to the receiver not sure how long the FPV stuff will last like that but I'm only using it to train myself on FPV drones. Props are an odd size. Overall a pretty killer craft though!
- I bought this on sale at almost 1/3rd published price. For the money I paid it is great. It is FPV capable, works with DSM2 and had betaflight. It flies okay, has a decent battery and decent flight time. There is no OSD, but it is okay since it has a very bright color and an onboard beeper. So if you lose it in tall grass it is relatively easy to find. It has a very stable flight characteristics.
- Suggerimento:
- Props are made of very weak material and bend very easily. After a few hits they do not stay on motors and fly away.
- I bought this on sale at almost 1/3rd published price. For the money I paid it is great. It is FPV capable, works with DSM2 and had betaflight. It flies okay, has a decent battery and decent flight time. There is no OSD, but it is okay since it has a very bright color and an onboard beeper. So if you lose it in tall grass it is relatively easy to find. It has a very stable flight characteristics.
- came on time and well packaged from GB. fpv range is good. had a Flysky 82 on it binded to my Turnigy Evolution. It was running IBUS. the picture shows where i soldered the leads. upgraded to Betaflight 3.2.3 easily after upgrading the USB drivers. now it has antigravity! all filters are on.
- Suggerimento:
- The motors got hot fast and the props kept popping off all the time, had to use crazy glue but still. I removed the canopy and the prop guards as shown below in the picture just to make it lighter. I think this is too expensive and sluggish by 2018 standards even for a brushed.
- I do like design of this drone it is so much different from other drones in this class. The main frame is made from carbon fibres. Even though it is not the thickest frame (another 1mm would be nice) it provides good enough strenght.
- Suggerimento:
- The props can fly off the drone. Make shure to press them down firmly or even better use some hote glue to keep them in place. The camera is fixed and you can not adjust it. Original price is a bit high if you get it at sale price go for it!
- So far haven't flew it yet. But it arrived safe and look good build quality. I paid a really good price for it. It's cheaper than a 6mm motor micro drone. For $45, i got the whole 2S battery drone with a camera and receiver, unbelievable price.
- Suggerimento:
- Spare parts are a little pricey compared to the amount i paid for the whole drone.
- Pros Super deal for the sale price of €24,37 that I paid. Comes with basic instructions, Dsmx RX, set of spare props and 1x 2s lipo and 2S usb-chargerNice for newbees wanting to go for the next step after flying E010, E011 etc
- Suggerimento:
- ConsBee is somewhat big when compared to tiny whoopNeeds to be bound everytime you turn it back on
- Une bien belle petit abeille qui vole bien une fois parvenu a régler la radio sous betaflight. Je suis satisfait de mon achat elle est performante bien que j'ai eu aussi un légé souci avec les hélices qui se decrochent en vol, j'ai solutionné le problème avec une goute de cole :)
- Suggerimento:
- hélice qui ne reste pas toujours en place en vol
- These are great little brushed quads for backyard flying, and areas where larger faster quads can't be flown. A real steal when available on sale.
- Suggerimento:
- None so far
- Support true Rate/Acro mode! Small Size – 90mm, very compact and easy to carry in your backpack Fun/cute look
- Suggerimento:
- USB port placement Battery – not the best VTX switch placement – can’t change channel without taking the canopy off VTX antenna breaks easily Camera lens falls off – leaving the sensor exposed to dust Props fall off easily Screw under the propeller and obstructs spinning Inconsistent buzzer performance Requires additional Superglue :D Battery didn’t fit in the battery cage Battery cage breaks easily in crashes
